Reference the placement number to the sensor application grid below.

The WDB, MDB & ADB Series bearing temperature sensors are designed to screw directly into an existing grease zerk fitting on a bearing housing. Each sensor is equipped with a grease fitting to allow for lubrication of the bearing without the need for removal of the sensor. Most series are available with either a PTC thermistor with various factory set trip points,a NTC thermistor with a user adjustable trip point, or as a Pt100 RTD version. VIEW PRODUCTS 

Monitors rotating machinery for dangerous underspeed conditions. An inductive sensing device located in the nose of the enclosure will detect a metal target. Set to the normal machine RPM, 4B Speedswitches provide alarm and shutdown signals underspeed and stopped motion. *Can be used with the Whirligig universal shaft sensor mount 3 Binswitch. VIEW PRODUCTS 

The Binswitch detects level or plug conditions for bulk granular solids or liquids in tanks, bins, and silos. It can be used as a plug or choke detector in chutes, conveyors, and elevator legs. VIEW PRODUCTS 

The Roto Level Series are rotary paddle switches designed to detect high and low levels of bulk granular solids in bins, tanks, silos, and as blockage detectors in spouts. VIEW PRODUCTS 

The WDA Series are non-contacting extended range magnetic sensors used to detect ferrous targets (such as bucket bolts or steel buckets) at a distance of up to 75mm from the sensor. It can also be used as a chain break detector. VIEW PRODUCTS 

The Touchswitch is an electro-mechanical limit-switch style sensor with no moving parts. It is designed to detect belt tracking and misalignment problems on bucket elevators and conveyors. Unlike a rub block that utilizes friction (heat) to activate, the Touchswitch is pressure sensitive for safer and more reliable monitoring. VIEW PRODUCTS 

4B inductive proximity sensors are designed to detect shaft speed, shaft position, gate position, or object presence. No contact is made between the monitored sensor and the target. Sensors will detect a ferrous object at 12mm and a non-ferrous metal object at a distance of 8mm. *Can be used with the Whirligig universal shaft sensor mountVIEW PRODUCTS 

The Autoset Series are self-contained point level monitors with digital displays for high, intermediate, or low-level detection of liquids, powders, or free-flowing granular solids. The Autoset Series incorporates simple push-button calibration with microprocessor enable/disable switch for total protection of stored values. Once the unit is calibrated for a specific application, it never has to be re-calibrated. VIEW PRODUCTS